What are the requirements for the sand machine equipment test?

What are the requirements for the sand machine equipment test?

After the sand making machine is installed, it can't be put into production directly. Many users know this because the whole production line is not just a piece of equipment. The whole sand making line is composed of multiple equipments, such as feeders and hoes. Crusher, sand making machine, vibrating screen, sand washing machine, fine sand recycling machine and other equipment, so the entire production line should be checked when starting up, to avoid the impact of a single equipment on the production of the entire production line! However, as for the requirements of the sand making machine test, some users are not very clear. In order to help users solve this problem, we consulted the technical staff of SBM Machinery in detail and gave a more comprehensive answer:

Sanding machine no-load test requirements:

• (1) Before the test, check that all the solid parts are in good condition and ensure that there is no looseness;
• (2) Check the adjustment device of the discharge port of the sand making machine again, and the adjustment standard should strictly follow the adjustment range specified in the specification;
• (3) During the test run, observe the running state of the flywheel and the sheave to ensure smooth operation;
• (4) Ensure that all friction parts are free from scratches, chipping and grinding, and there is no abnormal noise. If abnormalities are found, stop the parking and check them out;
• (5) Continuous operation for 2 hours, the bearing temperature rise shall not exceed 30 °C.

Sanding machine on-load test requirements:

• (1) Before the feeding, the processing capacity of the sand making machine, the maximum feeding size and the finished product granularity shall be clarified to ensure that all contents meet the design requirements;
• (2) During the on-load test, there shall be no periodic or significant impact or impact;
• (3) There is no obvious turbulence between the adjusting seat and the frame ear seat. If it is, it should be fastened and tightened in time to prevent the normal production of the sand making machine;
• (4) For 8 hours of continuous operation, the bearing temperature rise shall not exceed 30 °C.

It is impossible to produce everything for the purchase of the sand making machine. In fact, we should not only pay attention to the problems of the test machine, but also pay attention to the maintenance of the sand making machine.